How to connect to projector via Airtame application         

  1. Turn on the projector by using the wall panel control or the wireless remote provided in the classroom.
  2. Click on the “Airtame” shortcut located on your desktop or taskbar.  
  3. The Airtame application will open on the right-hand side of your desktop screen. If it disappears from your screen for some reason just click on the Airtame shortcut again.
  4. Look at the projection screen and you will see the Airtame splash page.  locate the IP address on the screen.
  5. In the Airtame application you have open on your laptop enter the IP address into the field on the very top left of the screen.  Example:
  6. Once you enter the IP address the “share screen” button will appear.  Click on the “Share screen” button (Do not click “Share Window” button) and then you will see a 4-digit code displayed on the projection screen. You will also notice that the Airtame application is asking for that 4-digit code. Enter the 4-digit code into the Airtame application:
  7. Your screen should now be projected onto the screen.  The volume by default is set to off.  If you need sound click on the sound icon to toggle it off/on.  Example:

       
        8. When you are done presenting turn the projector off by using the wall control panel or the wireless remote.